T-Spikes | P-Spikes | D-Spike | E-Spikes |
T-Spikes Plus | P-Spikes Plus| D-Spike Plus | E-Spikes Plus

The Spikes Plus, depending on the chosen version, will harmonize with the vibrations and/or spurious resonances channeling and discharging them.

Spikes

The Harmonic Balancers T, P, D, and Plus versions are designed in a way that they can also be used in a hybrid way, where the user can express their creativity and mix different kits for a personalized optimization of the harmonic balancing of their audio system.

The T-SPIKES kit is designed to Harmonically Balance signal sources, such as integrated digital players or both mechanical and converters, PCs and dedicated DACs for liquid, analog players such as Tuners, Turntables, Record Decks, or Coils.

In the family of Harmonic Balancers, the T, P, and D versions are the minimum units.

The kits consist of three individual pieces and are commonly used under electronics, effectively becoming the actual feet, with each single spike supporting up to 25 kg.

The position of the harmonic balancer under the electronics does not have a precise rule other than finding the point of greatest balance in the weight distribution of the device and corresponding to a smooth surface.

The Spikes, depending on the chosen version, will harmonize with vibrations and/or spurious resonances by channeling and discharging them onto the dedicated base, practically an integrated tip worked from solid Anticorodal aluminum alloy.

Due to the way Harmonic Balancers T, P, D, and SPIKES are designed, a hybrid use can also be adopted where the user can express their creativity and mix different kits for a personalized optimization of the harmonic balancing of their audio system.

Preserving the music signal generated by the source, in its entirety and its beauty, is the guiding principle of Audio Mass.

Specifications

Height 26.5 mm

Diameter 20 mm

Weight 15 gr per Spike

Quantity 3

T-spikes

Audiomass T-spikes

The P-SPIKES kit is designed to Harmonically Balance amplifications and electronics that manage frequency cuts, used under preamplifiers, final and integrated amplifiers, electronic crossovers, and mixers.

In the family of Harmonic Balancers, the T, P, and D versions are the minimum units.

The kits consist of three individual pieces and are commonly used under electronics, effectively becoming the actual feet, with each single Spike supporting up to 25 kg.

The position of the harmonic balancer under the electronics does not have a precise rule other than finding the point of greatest balance in the weight distribution of the device and corresponding to a smooth surface.

The Spikes, depending on the chosen version, will harmonize with vibrations and/or spurious resonances by channeling and discharging them onto the dedicated base, practically an integrated tip worked from solid Anticorodal aluminum alloy.

Due to the way Harmonic Balancers T, P, D, and SPIKES are designed, a hybrid use can also be adopted where the user can express their creativity and mix different kits for a personalized optimization of the harmonic balancing of their audio system.

Preserving the music signal generated by the source, in its entirety and its beauty, is the guiding principle of Audio Mass.

Specifications:

Height 26.5 mm

Diameter 20 mm

Weight 15 gr per Spike

Quantity 3

Audiomass P-Spikes

Audiomass P-Spikes

The D-SPIKES kit was designed to Harmonically Balance devices that manage electrical energy, such as power conditioners, network distributors, multi-sockets, and power supplies separated from the devices.

In the family of Harmonic Balancers, the T, P, and D versions are the minimum units.

The kits consist of three individual pieces and are commonly inserted under electronics, becoming the actual feet. Each Spike supports up to 25 Kg.

The position of the harmonic balancer under the electronics does not have a precise rule, except to find the point of greatest balance in the distribution of the device’s weight and corresponding to a smooth surface. Depending on the chosen version, the Spikes will match the vibrations and/or spurious resonances by channeling and discharging them on the dedicated base, in practice an integrated underpinning worked from solid aluminum alloy.

With the way the T, P, D, and SPIKES Harmonic Balancers are designed, users can also resort to a hybrid use where they can unleash their creativity and mix the different kits for a personalized optimization of their audio system’s harmonic balance.

Preserving the musical signal generated by the source, in its entirety and beauty, is the guiding principle of Audio Mass.

Specifications:

Height 26.5 mm

Diameter 20 mm

Weight 15 gr per Spike

Quantity 3

Audiomass D-Spikes

Audiomass D-Spikes

The E-SPIKES kit was designed to Harmonically Balance speakers, both floor-standing and stand-mounted.

The E-SPIKES kit consists of three individual SPIKES bound together. Consequently, by combining the characteristics of T, P, and D Spikes, the harmonic balancer covers a wider ability to match vibrations and/or spurious resonances.

The Spikes’ intervention is discharged on a single dedicated base, integrated and worked from solid Anticorodal aluminum alloy.

E-SPIKES are designed to support very heavy speakers, and each individual E-Spike supports up to 75 kg.

Given their ability to intervene and their stability, E-Spikes can also be successfully used under electronics and turntables.

Preserving the musical signal generated by the source, in its entirety and beauty, is the guiding principle of Audio Mass.

Specifications:

Height 31 mm

Diameter 59.5 mm

Weight 110 gr per Spike

Quantity 6

Audiomass E-Spikes

Audiomass E-Spikes

Audiomass T-Spikes Plus

Audiomass T-Spikes Plus

The T-SPIKES Plus kit was designed to Harmonically Balance signal sources, such as integrated digital players, as well as mechanical and digital-to-analog converters, dedicated PCs and DACs for liquid, analog players such as tuners, turntables, deck recorders, or coils.

The Plus version of T-SPIKES Harmonic Balancers is a decided implementation of the minimum version. Actually, although the principle and field of application remain unchanged, the Plus align themselves mechanically with the E-SPIKES version, so there are three support points and they are constrained to each other. The three support points and the copper insert are enclosed within a container, made of Anticorodal aluminum, where there are additional materials that contribute to the Harmonic Balancer intervention. Additionally, as an additional resonances interceptor, a copper insert is added, which exerts constant pressure on the bottom of the device, therefore in the opposite direction to the mass.

The kits consist of three single spikes, and in common use, they are inserted under electronics becoming the actual feet, each single spike supports up to 75 kg. The position of the harmonic balancer under the electronics does not have a precise rule except to find itself at the point of greatest balance in the distribution of the weights of the device and in correspondence with a smooth surface.

Depending on the chosen version, the Plus Spikes will tune into and/or channel and discharge spurious vibrations and resonances.

The T, P, D, SPIKES Plus Harmonic Balancers are designed in such a way that an hybrid use can be resorted to where the user can unleash their creativity and mix the different kits for a personalized optimization of their audio system’s harmonic balance.

The effectiveness increase compared to the basic models of the Spikes is even more evident, the music signal generated by the source is returned naturally by the acoustic speakers, both in its entirety and in its beauty.

Specifications:

Height 36 mm

Diameter 73.5 mm

Weight 280 g per Spikes

Quantity 3

Audiomass P-Spikes Plus

Audiomass P-Spikes Plus

The P-SPIKES Plus kit is designed to Harmonically Balance amplifications and electronics that handle frequency cuts, and it is used under preamplifiers, final and integrated amplifiers, electronic crossovers, and mixers.

The Plus version of the P-SPIKES Harmonic Balancers is a decisive implementation of the minimum version. In fact, although the principle and field of application remain unchanged, the Plus align themselves mechanically with the E-SPIKES version, so there are three support points and they are constrained to each other. The three support points and the copper insert are enclosed within a container, made of Anticorodal aluminum, where there are additional materials that contribute to the Harmonic Balancer intervention. Additionally, as an additional resonances interceptor, a copper insert is added, which exerts constant pressure on the bottom of the device, therefore in the opposite direction to the mass.

The kits consist of three single spikes, and in common use, they are inserted under electronics becoming the actual feet, each single spike supports up to 75 kg. The position of the harmonic balancer under the electronics does not have a precise rule except to find itself at the point of greatest balance in the distribution of the weights of the device and in correspondence with a smooth surface.

Depending on the chosen version, the Plus Spikes will tune into and/or channel and discharge spurious vibrations and resonances.

The T, P, D, SPIKES Plus Harmonic Balancers are designed in such a way that an hybrid use can be resorted to where the user can unleash their creativity and mix the different kits for a personalized optimization of their audio system’s harmonic balance.

The effectiveness increase compared to the basic models of the Spikes is even more evident, the music signal generated by the source is returned naturally by the acoustic speakers, both in its entirety and in its beauty.

Specifications:

Height 36 mm

Diameter 73.5 mm

Weight 280 g per Spikes

Quantity 3

Audiomass D-Spikes Plus

Audiomass D-Spikes Plus

The D-SPIKES Plus kit has been designed to harmoniously balance devices that handle electrical energy, such as network conditioners, network distributors, power strips, and separate power supplies from devices.

The Plus version of the D-SPIKES Harmonic Balancers is a significant implementation of the minimum version. In fact, although the principle and scope of application remain unchanged, the Plus versions are mechanically aligned with the E-SPIKES version, so they have three support points and are constrained to each other. The three support points and the copper insert are enclosed within a container made of Anticorodal aluminum, where there are additional materials that contribute to the Harmonic Balancer’s intervention. Additionally, as an additional resonance interceptor, a copper insert is added that exerts constant pressure on the device’s bottom, in the opposite direction to the mass.

The kits consist of three individual spikes, and in common use, they are inserted under electronics, effectively becoming the actual feet, with each individual spike supporting up to 75 kg.

The position of the Harmonic Balancer under electronics does not have a precise rule other than to find the point of greatest balance in the distribution of the device’s weight and in correspondence with a smooth surface.

The Plus Spikes, depending on the chosen version, will tune in to and channel and discharge vibrations and/or stray resonances.

Due to how the T, P, D, and SPIKES Plus Harmonic Balancers are designed, hybrid use is possible, where the user can unleash their creativity and mix different kits for a personalized optimization of their audio system’s harmonic balance.

The effectiveness increase compared to the base models of the Spikes is even more evident, with the musical signal generated by the source being naturally returned by the acoustic speakers in its entirety and beauty.

Specifications:

Height 36 mm

Diameter 73.5 mm

Weight 280 gr per Spike

Quantity 3

The E-SPIKES Plus kit has been designed to harmoniously balance floor-standing and stand-mounted speakers.

The Plus version of the E-SPIKES Harmonic Balancer is an implementation of the minimum version, maintaining the three support points.

The E-SPIKES Plus kit consists of three individual spikes constrained to each other, thus combining the characteristics of the T, P, and D spikes. The Harmonic Balancer covers a wider range of vibrations and/or stray resonances.

The three support points and the copper insert are enclosed within a container made of Anticorodal aluminum, where there are additional materials that contribute to the Harmonic Balancer’s intervention. Additionally, as an additional resonance interceptor, a copper insert is added that exerts constant pressure on the device’s bottom, in the opposite direction to the mass.

The E-SPIKES are designed to support very heavy speakers, with each individual E-Spikes Plus supporting up to 75 kg.

Given their intervention capability and stability, the E-Spikes Plus can also be successfully used under electronics and turntables. The effectiveness increase compared to the base models of the E-Spikes is even more evident, with the musical signal generated by the source being naturally returned by the acoustic speakers in its entirety and beauty.

Specifications:

Height 36 mm

Diameter 73.5 mm

Weight 280 gr per Spike

Quantity 6

Audiomass E-Spikes Plus

Audiomass E-Spikes Plus

spike minimal audiomass

Audiomass Spike Minimal

Spike MINIMAL
The MINIMAL Spike, in its apparent construction simplicity, represents a strength of Audio Mass’s vast catalog.

Designed to be placed under audio equipment feet, the MINIMAL Spike is made of solid material, through CNC machining.
This is the same manufacturing process used for the T, P, D, E Spikes and for the PLUS, the current top-of-the-line products. From the early stages of development and initial testing, the MINIMAL Spike proved to be in line with what had been previously developed.
Each kit, consisting of 4 Spikes, supports up to 60 Kg.
The MINIMAL Spike is a simple, effective and lightweight Harmonic Balancer, in a word, intriguing.

Specifications

Height 5 mm
Diameter 35 mm
Weight 5 gr per Spike
Quantity 4

  • Radical Rack

Ask me a question!

1 + 5 = ?